ACSC08-51QBWAD Kingbright

SURFACE MOUNT DISPLAY ATTENTION Part Number: ACSC08-51QBWA/D Blue OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Descriptions z 0.8 inch digit height. z The Blue source color devices are made with InGaN z Low current operation. Light Emitting Diode. z Excellent character appearance. z Electrostatic discharge and power surge could damage z Mechanically rugged. the LEDs. z Gray face,white segment. z It is recommended to use a wrist band or anti- z Package: 200pcs/ reel electrostatic glove when handling the LEDs. z Moisture sensitivity level : level 2a. z All devices, equipments and machineries must be z RoHS compliant. electrically grounded. Package Dimensions& Internal Circuit Diagram Blue Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01 )unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 3. The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DSAJ8874 REV NO: V.6B DATE: DEC/21/2015 PAGE: 1 OF 5 APPROVED: Wynec CHECKED: Joe Lee DRAWN: F.T.Liu ERP: 1351000646 Selection Guide Iv (ucd) 1 10mA Part No. Emitting Color (Material) Lens Type Description Min. Typ. Common Cathode, Rt. ACSC08-51QBWA/D Blue (InGaN) White Diffused 3600 8700 Hand Decimal. Notes: 1. Luminous intensity/ luminous Flux: +/-15%. 2. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Emitting Color Typ. Max. Units Test Conditions peak Peak Wavelength Blue 460 nm IF=10mA D 1 Dominant Wavelength Blue 465 nm IF=10mA 1/2 Spectral Line Half-width Blue 25 nm IF=10mA C Capacitance Blue 100 pF VF=0V f=1MHz VF 2 Forward Voltage Blue 3 4.0 V IF=10mA IR Reverse Current Blue 50 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. 4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter Values Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current 1 150 mA Electrostatic Discharge Threshold (HBM) 250 V Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAJ8874 REV NO: V.6B DATE: DEC/21/2015 PAGE: 2 OF 5 APPROVED: Wynec CHECKED: Joe Lee DRAWN: F.T.Liu ERP: 1351000646