AM2520EH/ID5V Kingbright

SUBMINIATURE SOLID STATE LAMP Part Number: AM2520EH/ID5V High Efficiency Red Features Description z Black case enhances contrast. The High Efficiency Red source color devices are made with z Vibration and shock resistant. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Housing UL rating:94V-0. Light Emitting Diode. z Housing material: type 66 nylon. z 5V Internal Resistor. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAD1626 REV NO: V.8A DATE: MAR/26/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1102000013 Selection Guide Iv (mcd) 2 Viewing V= 5V Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 6 15 AM2520EH/ID5V High Efficiency Red (GaAsP/GaP) Red Diffused 40 *3 *8 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength High Efficiency Red 627 nm VF=5V D 1 Dominant Wavelength High Efficiency Red 617 nm VF=5V 1/2 Spectral Line Half-width High Efficiency Red 45 nm VF=5V IF Forward Current High Efficiency Red 13 17.5 mA VF=5V IR Reverse Current High Efficiency Red 10 uA VR = 5V Note: 1.Wavelength: +/-1nm. 2.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Units Power dissipation 85 mW Forward Voltage 6 V Reverse Voltage 5 V Operating Temperature -40C To +70C Storage Temperature -40C To +85C Lead Solder Temperature 1 260C For 3 Seconds Lead Solder Temperature 2 260C For 5 Seconds Notes: 1. 2mm below package base. 2. 5mm below package base. SPEC NO: DSAD1626 REV NO: V.8A DATE: MAR/26/2013 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1102000013