APA3010ZGC-GX 3.0 x 1.0 mm Right Angle SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Green source color devices are made with InGaN on Sapphire Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 3.0 x 2.0 x 1.0 mm right angle SMD LED, 1.0 mm thickness Low power consumption Wide viewing angle Ideal for back light and indicator Package: 2000 pcs / reel Moisture sensitivity level: 3 Halogen-free Tinned pads for improved solderability RoHS compliant RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) APPLICATIONS Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling Notes: 1. All dimensions are in millimeters (inches). electrostatic discharge sensitive devices 2. Tolerance is 0.15(0.006 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 APA3010ZGC-GX Green (InGaN) Water Clear 200 400 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2020 Kingbright. All Rights Reserved. Spec No: DSAL3677 / 1203003793 Rev No: V.7B Date: 10/09/2020 APA3010ZGC-GX ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Wavelength at Peak Emission I = 20mA Green 515 - nm F peak 1 Dominant Wavelength I = 20mA Green 525 - nm F dom Spectral Bandwidth at 50% REL MAX Green 30 - nm I = 20mA F Capacitance C Green 45 - pF 2 Forward Voltage I = 20mA V Green 3.3 4.1 V F F Reverse Current (V = 5V) I Green - 50 A R R Temperature Coefficient of peak TC Green 0.05 - nm/C peak I = 20mA, -10C T 85C F Temperature Coefficient of dom TC Green 0.03 - nm/C dom I = 20mA, -10C T 85C F Temperature Coefficient of V F TC Green -2.9 - mV/C V I = 20mA, -10C T 85C F Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Parameter Symbol Value Unit Power Dissipation P 102.5 mW D Reverse Voltage V 5 V R Junction Temperature T 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 25 mA F 1 Peak Forward Current I 150 mA FM Electrostatic Discharge Threshold (HBM) 450 V - 2 Thermal Resistance (Junction / Ambient) R 630 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 510 C/W th JS Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. R ,R Results from mounting on PC board FR4 (pad size 16 mm per pad). th JA th JS 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2020 Kingbright. All Rights Reserved. Spec No: DSAL3677 / 1203003793 Rev No: V.7B Date: 10/09/2020