APB3227SURKZGC Kingbright

3.2 x 2.7 mm Surface Mount LED LampX Part Number: APB3227SURKZGC ATTENTION Hyper Red OBSERVE PRECAUTIONS Green FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Descriptions z 3.2 mm x 2.7 mm SMD LED, 1.1 mm thickness z The Hyper Red source color devices are made with z Bi -color,low power consumption AlGaInP on GaAs substrate Light Emitting Diode. z Wide viewing angle z The Green source color devices are made with InGaN z Ideal for backlight and indicator on Sapphire Light Emitting Diode. z Package: 2000 pcs / reel z Electrostatic discharge and power surge could damage z Moisture sensitivity level: 3 the LEDs. z RoHS compliant z It is recommended to use a wrist band or anti- electrostatic glove when handling the LEDs. z All devices, equipments and machineries must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAM3596 REV NO: V.4A DATE: JUN/02/2017 PAGE: 1 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203006609 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Emitting Color (Material) Lens Type Min. Typ. 21/2 120 250 Hyper Red (AlGaInP) *40 *80 APB3227SURKZGC Water Clear 140 200 400 Green (InGaN) *200 *400 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Emitting Color Typ. Max. Units Test Conditions Hyper Red 645 peak Peak Wavelength nm IF=20mA Green 515 Hyper Red 630 D 1 Dominant Wavelength nm IF=20mA Green 525 Hyper Red 28 1/2 Spectral Line Half-width nm IF=20mA Green 30 Hyper Red 35 C Capacitance pF VF=0V f=1MHz Green 45 Hyper Red 1.95 2.5 VF 2 Forward Voltage F=20mA V I Green 3.3 4.1 Hyper Red 10 IR Reverse Current uA VR = 5V Green 50 Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Green Units Power dissipation 75 102.5 mW DC Forward Current 30 25 mA Peak Forward Current 1 185 150 mA Electrostatic Discharge Threshold (HBM) 3000 450 V Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAM3596 REV NO: V.4A DATE: JUN/02/2017 PAGE: 2 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203006609