APBA3010ESGC-GX Kingbright

3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: APBA3010ESGC-GX High Efficiency Red Super Bright Green Features Descriptions z 3.0x2.0x1.0mm right angle SMD LED, 1.0mm thickness. z The High Efficiency Red source color devices are made z Low power consumption. with Gallium Arsenide Phosphide on Gallium Phosphide z Wide viewing angle. Orange Light Emitting Diode. z Ideal for backlight and indicator. z The Super Bright Green source color devices are made z Package : 2000 pcs / reel. with Gallium Phosphide Green Light Emitting Diode. z Moisture sensitivity level : level 3. z Tinned pads for improved solderability z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAL3680 REV NO: V.7A DATE: JAN/05/2017 PAGE: 1 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203000795 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Emitting Color (Material) Lens Type Min. Typ. 21/2 8 15 High Efficiency Red (GaAsP/GaP) *3 *8 APBA3010ESGC-GX Water Clear 140 5 15 Super Bright Green (GaP) *5 *15 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Emitting Color Typ. Max. Units Test Conditions High Efficiency Red 627 peak Peak Wavelength nm IF=20mA Super Bright Green 565 High Efficiency Red 617 D 1 Dominant Wavelength nm IF=20mA Super Bright Green 568 High Efficiency Red 45 1/2 Spectral Line Half-width nm IF=20mA Super Bright Green 30 High Efficiency Red 15 C Capacitance pF VF=0V f=1MHz Super Bright Green 15 High Efficiency Red 2 2.5 VF 2 Forward Voltage V IF=20mA Super Bright Green 2.2 2.5 High Efficiency Red 10 IR Reverse Current uA VR = 5V Super Bright Green 10 Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Super Bright Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current 1 160 140 mA Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAL3680 REV NO: V.7A DATE: JAN/05/2017 PAGE: 2 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203000795