APBD3224LSURKSYKC Kingbright

APBD3224LSURKSYKC 3.2 x 2.4 mm SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The Super Bright Yellow device is made with AlGaInP (on GaAs substrate) light emitting diode chip Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 3.2 x 2.4 mm SMD LED, 2.4 mm thickness Low power consumption Ideal for backlight and indicator Package: 1500 pcs / reel Moisture sensitivity level: 3 Halogen-free RoHS compliant APPLICATIONS RECOMMENDED SOLDERING PATTERN Backlight (units : mm tolerance : 0.1) Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 2mA Viewing A ngle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 20 50 Hyper Red (AlGaInP) *10 *30 APBD3224LSURKSYKC Water Clear 20 20 50 Super Bright Yellow (AlGaInP) *20 *50 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAO4552 / 1203015160 Rev No: V.3A Date: 09/17/2021 APBD3224LSURKSYKC ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Min. Typ. Max. Hyper Red 645 Wavelength at Peak Emission I = 2mA - - nm F peak Super Bright Yellow 590 Hyper Red 630 1 Dominant Wavelength I = 2mA - - nm F dom Super Bright Yellow 590 Spectral Bandwidth at 50% REL MAX Hyper Red 28 - - nm I = 2mA Super Bright Yellow 20 F Hyper Red 35 Capacitance C - - pF Super Bright Yellow 20 Hyper Red 1.5 1.75 2.1 2 Forward Voltage I = 2mA V V F F Super Bright Yellow 1.5 1.85 2.1 Hyper Red 10 Reverse Current (V = 5V) I - - A R R Super Bright Yellow 10 Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Hyper Red Super Bright Yellow Power Dissipation P 75 75 mW D Reverse Voltage V 5 5 V R Junction Temperature T 115 115 C J Operating Temperature T -40 To +85 C op Storage Temperature T -40 To +85 C stg DC Forward Current I 30 30 mA F 1 Peak Forward Current I 185 175 mA FM Electrostatic Discharge Threshold (HBM) 3000 3000 V - Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAO4552 / 1203015160 Rev No: V.3A Date: 09/17/2021