APBDA3020CGKSYKC-GX Kingbright

APBDA3020CGKSYKC-GX 3.0 x 2.0 mm Right Angle SMD LED DESCRIPTIONS PACKAGE DIMENSIONS The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The Super Bright Yellow device is made with AlGaInP (on GaAs substrate) light emitting diode chip Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 3.0 x 2.8 x 2.0 mm right angle SMD LED, 2.0 mm thickness Low power consumption Ideal for backlight and indicator Package: 2000 pcs / reel The maximum shear tolerance of the epoxy lens is 300g Moisture sensitivity level: 3 Tinned pads for improved solderability Halogen-free RoHS compliant RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) APPLICATIONS Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Notes: Observe precautions for handling 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008 ) unless otherwise noted. electrostatic discharge sensitive devices 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 120 280 Green (AlGaInP) APBDA3020CGKSYKC-GX Water Clear 15 Super Bright Yellow 400 700 (AlGaInP) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAL0181 / 1203012188 Rev No: V.11B Date: 01/05/2021 APBDA3020CGKSYKC-GX ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Green 574 Wavelength at Peak Emission I = 20mA - nm F peak Super Bright Yellow 590 Green 570 1 Dominant Wavelength I = 20mA - nm F dom Super Bright Yellow 590 Spectral Bandwidth at 50% REL MAX Green 20 - nm I = 20mA Super Bright Yellow 20 F Green 15 Capacitance C - pF Super Bright Yellow 20 Green 2.1 2.5 2 Forward Voltage I = 20mA V V F F Super Bright Yellow 2.0 2.5 Green 10 Reverse Current (V = 5V) I - A R R Super Bright Yellow 10 Temperature Coefficient of Green 0.12 peak TC - nm/C peak I = 20mA, -10C T 85C Super Bright Yellow 0.12 F Temperature Coefficient of Green 0.08 dom TC - nm/C dom I = 20mA, -10C T 85C Super Bright Yellow 0.07 F Temperature Coefficient of V Green -1.9 F TC - mV/C V I = 20mA, -10C T 85C Super Bright Yellow -1.9 F Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Green Super Bright Yellow Power Dissipation P 75 75 mW D Reverse Voltage V 5 5 V R Junction Temperature T 115 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 30 mA F 1 Peak Forward Current I 150 175 mA FM Electrostatic Discharge Threshold (HBM) - 3000 3000 V 2 Thermal Resistance (Junction / Ambient) R 720 580 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 600 470 C/W th JS Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. R ,R Results from mounting on PC board FR4 (pad size 16 mm per pad). th JA th JS 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAL0181 / 1203012188 Rev No: V.11B Date: 01/05/2021