APFA2507QBDSEEZGKC 2.5 x 0.7 mm Right Angle SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Blue source color devices are made with InGaN Light Emitting Diode The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The Green source color devices are made with InGaN on Sapphire Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 2.5 x 1.0 x 0.7 mm right angle SMD LED, 0.7 mm thickness Low power consumption Wide viewing angle Ideal for backlight and indicator Package: 3000 pcs / reel Moisture sensitivity level: 3 Tinned pads for improved solderability RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) Halogen-free RoHS compliant APPLICATIONS Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006 ) unless otherwise noted. ATTENTION 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. Observe precautions for handling 4. The device has a single mounting surface. The device must be mounted according to the specifications. electrostatic discharge sensitive devices SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 40 65 Blue (InGaN) Hyper Red APFA2507QBDSEEZGKC Water Clear 80 110 130 (AlGaInP) 300 500 Green (InGaN) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAO0362 / 1203014712 Rev No: V.10B Date: 01/05/2021 APFA2507QBDSEEZGKC ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Unit Blue Hyper Red Green Wavelength at Peak Emission I = 20mA (typ) 460 630 515 nm F peak 1 Dominant Wavelength I = 20mA (typ) 465 621 525 nm F dom Spectral Bandwidth at 50% REL MAX (typ) 25 20 35 nm I = 20mA F Capacitance (typ) C 100 25 45 pF (typ) 3 . 3 2.0 3.3 2 Forward Voltage I = 20mA V V F F (max) 4.0 2.5 4.1 Reverse Current (V = 5V) (max) I 50 10 50 A R R Temperature Coefficient of peak (typ) TC 0.04 0.13 0.05 nm/C peak I = 20mA, -10C T 85C F Temperature Coefficient of dom (typ) TC 0.03 0.06 0.03 nm/C dom I = 20mA, -10C T 85C F Temperature Coefficient of V F (typ) TC -3.0 -1.9 -3.0 mV/C V I = 20mA, -10C T 85C F Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d: 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Blue Hyper Red Green Power Dissipation P 120 75 102.5 mW D Reverse Voltage V 5 5 5 V R Junction Temperature T 115 115 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 30 25 mA F 1 Peak Forward Current I 150 195 150 mA FM Electrostatic Discharge Threshold (HBM) 250 3000 450 V - 2 Thermal Resistance (Junction / Ambient) R 580 670 560 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 460 570 440 C/W th JS Notes: 1. 1/10 Duty Cycle , 0.1ms Pulse Width . 2 2. Rth JA, Rth JS Results from mounting on PC board FR4 (pad size16 mm per pad). 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAO0362 / 1203014712 Rev No: V.10B Date: 01/05/2021