X-On Electronics has gained recognition as a prominent supplier of APFA3010SURKCGKQBDC Standard LEDs - SMD across the USA, India, Europe, Australia, and various other global locations. APFA3010SURKCGKQBDC Standard LEDs - SMD are a product manufactured by Kingbright. We provide cost-effective solutions for Standard LEDs - SMD, ensuring timely deliveries around the world.
We are delighted to provide the APFA3010SURKCGKQBDC from our Standard LEDs - SMD category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the APFA3010SURKCGKQBDC and other electronic components in the Standard LEDs - SMD category and beyond.
3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: APFA3010SURKCGKQBDC ATTENTION Hyper Red OBSERVE PRECAUTIONS Green FOR HANDLING Blue ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Descriptions z 3.0x1.5x1.0mm right angle SMD LED, 1.0mm thick- z The Hyper Red source color devices are made with ness. AlGaInP on GaAs substrate Light Emitting Diode. z Low power consumption. z The Green source color devices are made with AlGaInP z Wide viewing angle. on GaAs substrate Light Emitting Diode. z Ideal for backlight and indicator. z The Blue source color devices are made with InGaN z Package : 2000pcs / reel. Light Emitting Diode. z Moisture sensitivity level : level 3. z Electrostatic discharge and power surge could damage z Tinned pads for improved solderability. the LEDs. z RoHS compliant. z It is recommended to use a wrist band or anti- electrostatic glove when handling the LEDs. z All devices, equipments and machineries must be electrically grounded. Package Dimensions Green Blue Red Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAI5391 REV NO: V.8A DATE: DEC/09/2015 PAGE: 1 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203008277 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Emitting Color (Material) Lens Type Min. Typ. 21/2 120 220 Hyper Red (AlGaInP) *55 *80 20 45 APFA3010SURKCGKQBDC Green (AlGaInP) Water Clear 120 *20 *45 40 70 Blue (InGaN) *40 *70 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Emitting Color Typ. Max. Units Test Conditions Hyper Red 645 peak Peak Wavelength Green 574 nm IF=20mA Blue 460 Hyper Red 630 D 1 Dominant Wavelength Green 570 nm IF=20mA Blue 465 Hyper Red 28 1/2 Spectral Line Half-width Green 20 nm IF=20mA Blue 25 Hyper Red 35 C Capacitance Green 15 pF VF=0V f=1MHz Blue 100 Hyper Red 1.95 2.5 VF 2 Forward Voltage Green 2.1 2.5 V IF=20mA Blue 3.3 4 Hyper Red 10 IR Reverse Current Green 10 uA VR=5V Blue 50 Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Green Blue Units Power dissipation 75 75 120 mW DC Forward Current 30 30 30 mA Peak Forward Current 1 185 150 150 mA Electrostatic Discharge Threshold (HBM) 3000 3000 250 V Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAI5391 REV NO: V.8A DATE: DEC/09/2015 PAGE: 2 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203008277