APFA3011-AK13/F 3.0 x 1.0 mm Right Angle SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Blue source color devices are made with InGaN Light Emitting Diode The Hyper Red device is based on light emitting diode chip made from AlGaInP The Green source color devices are made with InGaN Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 3.0 x 1.5 x 1.0 mm right angle SMD LED, 1.0 mm thickness Low power consumption Wide viewing angle Ideal for backlight and indicator Package: 2000 pcs / reel Moisture sensitivity level: 3 Halogen-free RoHS compliant RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) APPLICATIONS Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Notes: 1. All dimensions are in millimeters (inches). Observe precautions for handling 2. Tolerance is 0.2(0.008 ) unless otherwise noted. electrostatic discharge sensitive devices 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 Iv (mcd) Iv (mcd) Dice Chromaticity Viewing 2 1 Emitting Color Lens 20mA B:R:G=1 5.6mA:19.1mA:20mA Coordinates Angle Part Number (Material) Type Min. Typ. Typ. x (Typ.) y (Typ.) 21/2 80 150 Blue (InGaN) Water Hyper Red APFA3011-AK13/F 200 410 1320 0.3 0.3 150 Clear (AlGaInP) 500 780 Green (InGaN) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 5 2021 Kingbright. All Rights Reserved. Spec No: DSAP0829 / 1203015592 Rev No: V.6B Date: 01/06/2021 APFA3011-AK13/F ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Unit Blue Hyper Red Green Wavelength at Peak Emission I = 20mA (typ) 465 640 520 nm F peak 1 Dominant Wavelength I = 20mA (typ) 470 625 525 nm F dom Spectral Bandwidth at 50% REL MAX (typ) 22 20 35 nm I = 20mA F Capacitance (typ) C 100 27 100 pF Forward Voltage I = 20mA (typ) 3.3 2.2 3.2 F 2 V V F (max) 4.0 2.8 4.0 Reverse Current (V = 5V) (max) I 50 10 50 A R R Temperature Coefficient of (typ) peak TC 0.04 0.13 0.05 nm/C peak I = 20mA, -10C T 85C F Temperature Coefficient of (typ) dom TC 0.03 0.06 0.03 nm/C dom I = 20mA, -10C T 85C F Temperature Coefficient of V (typ) F TC -3.0 -2.0 -3.0 mV/C V I = 20mA, -10C T 85C F Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d: 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Blue Hyper Red Green Power Dissipation P 120 84 120 mW D Reverse Voltage V 5 5 5 V R Junction Temperature T 115 115 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 30 30 mA F 1 Peak Forward Current I 100 150 100 mA FM Electrostatic Discharge Threshold (HBM) 8000 3000 8000 V - 2 Thermal Resistance (Junction / Ambient) R 500 520 680 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 390 440 570 C/W th JS Notes: 1. 1/10 Duty Cycle , 0.1ms Pulse Width . 2 2. R R Results from mounting on PC board FR4 (pad size16 mm per pad). th JA, th JS 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 5 2021 Kingbright. All Rights Reserved. Spec No: DSAP0829 / 1203015592 Rev No: V.6B Date: 01/06/2021