APG0603ZGC-5MAV Kingbright

APG0603ZGC-5MAV 0.65 x 0.35 x 0.2 mm SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Green source color devices are made with InGaN on Sapphire Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 0.65 mm x 0.35 mm SMD LED, 0.2 mm thickness Low power consumption Wide viewing angle Compatible with automatic placement equipment Package: 4000 pcs / reel Moisture sensitivity level: 2 RoHS compliant APPLICATIONS Backlight RECOMMENDED SOLDERING PATTERN Status indicator (units : mm tolerance : 0.1) Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Mask open area ratio:80% Mask thickness:80~100um Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 5mA Viewing A ngle Emitting Color Part Number Lens Type (Material) Min. Typ. 2 1/2 APG0603ZGC-5MAV Water Green (InGaN) Clear 180 280 140 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2018 Kingbright. All Rights Reserved. Spec No: DSAP6041 / 1203015900 Rev No: V.1B Date: 10/18/2018 APG0603ZGC-5MAV ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Wavelength at Peak Emission I = 5mA Green 515 - nm F peak 1 Dominant Wavelength I = 5mA Green 525 - nm F dom Spectral Bandwidth at 50% REL MAX Green 30 - nm I = 5mA F 2 Forward Voltage I = 5mA V Green 2.85 3.3 V F F Reverse Current (V = 5V) I Green - 50 uA R R Temperature Coefficient of peak TC Green 0.05 - nm/C peak I = 5mA, -10C T 85C F Temperature Coefficient of dom TC Green 0.03 - nm/C dom I = 5mA, -10C T 85C F Temperature Coefficient of V F TC Green -3.0 - mV/C V I = 5mA, -10C T 85C F Notes: 1. The dominant wavelength ( d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Parameter Symbol Value Unit Power Dissipation P 34 mW D Reverse Voltage V 5 V R Junction Temperature T 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 10 mA F 1 Peak Forward Current I 50 mA FM Electrostatic Discharge Threshold (HBM) 450 V - 2 Thermal Resistance (Junction / Ambient) R 670 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 530 C/W th JS Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. R ,R Results from mounting on PC board FR4 (pad size 16 mm per pad). th JA th JS 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2018 Kingbright. All Rights Reserved. Spec No: DSAP6041 / 1203015900 Rev No: V.1B Date: 10/18/2018