APGF0606SEEKCGKXC-TT Kingbright

APGF0606SEEKCGKXC-TT 0.65 x 0.65 x 0.2 mm Bi-Color Surface Mount LED PACKAGE DIMENSIONS DESCRIPTIONS The Hyper-Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 0.65 mm x 0.65mm SMD LED, 0.2 mm thickness Low power consumption Package: 4000 pcs / reel Moisture sensitivity level: 3 Halogen-free RoHS compliant APPLICATIONS Backlight RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 5mA Viewing A ngle Emitting Color Part Number Lens Type (Material) Min. Typ. 2 1/2 30 80 Hyper Red (AlGaInP) APGF0606SEEKCGKXC-TT Water Clear 140 4 8 Green (AlGaInP) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2022 Kingbright. All Rights Reserved. Spec No: DSAQ0459 / 1203016053 Rev No: V.3B Date: 03/08/2022 APGF0606SEEKCGKXC-TT ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Hyper Red 632 Wavelength at Peak Emission I = 5mA - nm F peak Green 572 Hyper Red 624 1 Dominant Wavelength I = 5mA - nm F dom Green 571 Spectral Bandwidth at 50% REL MAX Hyper Red 20 - nm I = 5mA Green 20 F Hyper Red 25 Capacitance C - pF Green 15 Hyper Red 1.95 2.3 2 Forward Voltage I = 5mA V V F F Green 1.92 2.3 Hyper Red 10 Reverse Current (V = 5V) I - A R R Green 10 Notes: 1. The dominant wavelength ( d) above is the setup value of the sorting machine. (Tolerance d: 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Hyper Red Green 1 Power Dissipation P 35 mW D Reverse Voltage V 5 5 V R Junction Temperature T 115 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +100 C stg 2 DC Forward Current I 10 10 mA F 3 Peak Forward Current I 50 50 mA FM Electrostatic Discharge Threshold (HBM) 3000 3000 V - Notes: 1. Within 35mW when multiple chips are lightened 2. The maximum ratings are valid for the case of lighting a single chip When two chips are lit at the same time, each chip should be driven at a current lower than 50% of the absolute maximum ratings 3. Duty Cycle 1 / 20, Pulse Width = 1ms. 4. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2022 Kingbright. All Rights Reserved. Spec No: DSAQ0459 / 1203016053 Rev No: V.3B Date: 03/08/2022