APGF0606SYKCGK-TT-C2 Kingbright

APGF0606SYKCGK-TT-C2 0.65 x 0.65 x 0.2 mm Bi-Color Surface Mount LED PACKAGE DIMENSIONS DESCRIPTIONS The Super Bright Yellow source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 0.65 mm x 0.65 mm SMD LED, 0.2 mm thickness Low power consumption Package: 4000 pcs / reel Moisture sensitivity level: 3 Halogen-free RoHS compliant RECOMMENDED SOLDERING PATTERN APPLICATIONS (units : mm tolerance : 0.1) Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 5mA Viewing A ngle Emitting Color Part Number Lens Type (Material) Min. Typ. 2 1/2 Super Bright Yellow 10 17 (AlGaInP) APGF0606SYKCGK-TT-C2 Water Clear 140 4 8 Green (AlGaInP) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2022 Kingbright. All Rights Reserved. Spec No: DSAQ0501 / 1203016057 Rev No: V.3B Date: 03/08/2022 APGF0606SYKCGK-TT-C2 ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Super Bright Yellow 591 Wavelength at Peak Emission I = 5mA - nm F peak Green 572 Super Bright Yellow 589 1 Dominant Wavelength I = 5mA - nm F dom Green 571 Spectral Bandwidth at 50% REL MAX Super Bright Yellow 15 - nm I = 5mA Green 20 F Super Bright Yellow 25 Capacitance C - pF Green 15 Super Bright Yellow 1.97 2.3 2 Forward Voltage I = 5mA V V F F Green 1.92 2.3 Super Bright Yellow 10 Reverse Current (V = 5V) I - A R R Green 10 Notes: 1. The dominant wavelength ( d) above is the setup value of the sorting machine. (Tolerance d: 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Super Bright Yellow Green 1 Power Dissipation P 35 mW D Reverse Voltage V 5 5 V R Junction Temperature T 115 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +100 C stg 2 DC Forward Current I 10 10 mA F 3 Peak Forward Current I 50 50 mA FM Electrostatic Discharge Threshold (HBM) 3000 3000 V - Notes: 1. Within 35mW when multiple chips are lightened 2. The maximum ratings are valid for the case of lighting a single chip When two chips are lit at the same time, each chip should be driven at a current lower than 50% of the absolute maximum ratings 3. Duty Cycle 1 / 20, Pulse Width = 1ms. 4. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2022 Kingbright. All Rights Reserved. Spec No: DSAQ0501 / 1203016057 Rev No: V.3B Date: 03/08/2022