APHB1608LCGKSURKC Kingbright

APHB1608LCGKSURKC 1.6 x 0.8 x 0.5 mm Bi-Color Surface Mount LED DESCRIPTIONS PACKAGE DIMENSIONS The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 1.6 x 0.8 mm SMD LED, 0.5 mm thickness Compatible with reflow soldering Available in various color combination Package: 2000 pcs / reel Moisture sensitivity level: 3 Tinned pads for improved solderability RoHS compliant APPLICATIONS Backlight RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 2mA Viewing A ngle Emitting Color Part Number Lens Type (Material) Min. Typ. 2 1/2 1.2 3 Green (AlGaInP) *1.2 *3 APHB1608LCGKSURKC Water Clear 130 10 20 Hyper Red (AlGaInP) *2 *8 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2017 Kingbright. All Rights Reserved. Spec No: DSAO5239 / 1203015220 Rev No: V.3A Date: 07/03/2017 APHB1608LCGKSURKC ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Min. Typ. Max. Green 574 Wavelength at Peak Emission I = 2mA - - nm F peak Hyper Red 645 Green 570 1 Dominant Wavelength I = 2mA - - nm F dom Hyper Red 630 Spectral Bandwidth at 50% REL MAX Green 20 - - nm I = 2mA Hyper Red 28 F Green 15 Capacitance C - - pF Hyper Red 35 Green 1.5 1.9 2.1 2 Forward Voltage I = 2mA V V F F Hyper Red 1.5 1.75 2.1 Green 10 Reverse Current (V = 5V) I - - uA R R Hyper Red 10 Notes: 1. The dominant wavelength ( d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Green Hyper Red Power Dissipation P 75 75 mW D Reverse Voltage V 5 5 V R Junction Temperature T 115 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 30 mA F 1 Peak Forward Current I 150 185 mA FM Electrostatic Discharge Threshold (HBM) 3000 3000 V - Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2017 Kingbright. All Rights Reserved. Spec No: DSAO5239 / 1203015220 Rev No: V.3A Date: 07/03/2017