APHB1608QBDSURKC 1.6 x 0.8 x 0.5 mm Bi-Color Surface Mount LED DESCRIPTIONS PACKAGE DIMENSIONS The Blue source color devices are made with InGaN Light Emitting Diode The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 1.6 x 0.8 mm SMD LED, 0.5 mm thickness Compatible with reflow soldering Available in various color combination Package: 2000 pcs / reel Moisture sensitivity level: 3 Tinned pads for improved solderability Halogen-free RoHS compliant APPLICATIONS RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 40 70 Blue (InGaN) *40 *70 APHB1608QBDSURKC Water Clear 130 120 250 Hyper Red (AlGaInP) *40 *90 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAK7907 / 1203011320 Rev No: V.10A Date: 07/09/2021 APHB1608QBDSURKC ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Blue 460 Wavelength at Peak Emission I = 20mA - nm F peak Hyper Red 645 Blue 465 1 Dominant Wavelength I = 20mA - nm F dom Hyper Red 630 Spectral Bandwidth at 50% REL MAX Blue 25 - nm I = 20mA Hyper Red 28 F Blue 100 Capacitance C - pF Hyper Red 35 Blue 3.3 4.0 2 Forward Voltage I = 20mA V V F F Hyper Red 1.95 2.5 Blue 50 Reverse Current (V = 5V) I - A R R Hyper Red 10 Temperature Coefficient of Blue 0.04 peak TC - nm/C peak I = 20mA, -10C T 85C Hyper Red 0.14 F Temperature Coefficient of Blue 0.03 dom TC - nm/C dom I = 20mA, -10C T 85C Hyper Red 0.05 F Temperature Coefficient of V Blue -3.0 F TC - mV/C V I = 20mA, -10C T 85C Hyper Red -1.9 F Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Blue Hyper Red Power Dissipation P 120 75 mW D Reverse Voltage V 5 5 V R Junction Temperature T 115 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 30 mA F 1 Peak Forward Current I 150 185 mA FM Electrostatic Discharge Threshold (HBM) 250 3000 V - 2 Thermal Resistance (Junction / Ambient) R 740 640 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 580 490 C/W th JS Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. R ,R Results from mounting on PC board FR4 (pad size 16 mm per pad). th JA th JS 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAK7907 / 1203011320 Rev No: V.10A Date: 07/09/2021