X-On Electronics has gained recognition as a prominent supplier of APHB1608SGYC Standard LEDs - SMD across the USA, India, Europe, Australia, and various other global locations. APHB1608SGYC Standard LEDs - SMD are a product manufactured by Kingbright. We provide cost-effective solutions for Standard LEDs - SMD, ensuring timely deliveries around the world.
We are delighted to provide the APHB1608SGYC from our Standard LEDs - SMD category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the APHB1608SGYC and other electronic components in the Standard LEDs - SMD category and beyond.
1.6x0.8x0.5mm BI-COLOR SURFACE MOUNT LED Part Number: APHB1608SGYC Super Bright Green Yellow Features Description z 1.6mmX0.8mm SMT LED, 0.5mm thickness. The Super Bright Green source color devices are made with z Compatible with reflow soldering. Gallium Phosphide Green Light Emitting Diode. z Available in various color combination. The Yellow source color devices are made with Gallium z Package: 2000pcs / reel. Arsenide Phosphide on Gallium Phosphide Yellow Light z Moisture sensitivity level : level 3. Emitting Diode. z Tinned pads for improved solderability. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006 ) unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAK7900 REV NO: V.5B DATE: APR/20/2012 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203011315 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 Super Bright Green (GaP) 5 15 APHB1608SGYC Water Clear 130 Yellow (GaAsP/GaP) 3 5 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Super Bright Green 565 peak Peak Wavelength nm IF=20mA Yellow 590 Super Bright Green 568 D 1 Dominant Wavelength nm IF=20mA Yellow 588 Super Bright Green 30 1/2 Spectral Line Half-width nm IF=20mA Yellow 35 Super Bright Green 15 C Capacitance pF VF=0V f=1MHz Yellow 20 Super Bright Green 2.2 2.5 VF 2 Forward Voltage V IF=20mA Yellow 2.1 2.5 Super Bright Green 10 IR Reverse Current uA VR = 5V Yellow 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Super Bright Green Yellow Units Power dissipation 62.5 75 mW DC Forward Current 25 30 mA Peak Forward Current 1 140 140 mA Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAK7900 REV NO: V.5B DATE: APR/20/2012 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203011315