APHB1608ZGSYKJ3C Kingbright

1.6x0.8x0.5mm BI-COLOR SURFACE MOUNT LED Part Number: APHB1608ZGSYKJ3C ATTENTION OBSERVE PRECAUTIONS Green FOR HANDLING Super Bright Yellow ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Descriptions z 1.6mmX0.8mm SMT LED, 0.5mm thickness. z The Green source color devices are made with InGaN z Compatible with reflow soldering. on Sapphire Light Emitting Diode. z Available in various color combination. z The Super Bright Yellow device is based on light emitting z Package: 2000pcs / reel . diode chip made from AlGaInP. z Moisture sensitivity level : level 3. z Electrostatic discharge and power surge could damage z Tinned pads for improved solderability. the LEDs. z RoHS compliant. z It is recommended to use a wrist band or anti- electrostatic glove when handling the LEDs. z All devices, equipments and machineries must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006 ) unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAN7061 REV NO: V.1B DATE: JUN/17/2014 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203014334 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Dice Lens Type Min. Typ. 2 1/2 Green (InGaN) 200 350 APHB1608ZGSYKJ3C Water Clear 130 Super Bright Yellow (AlGaInP) 200 300 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Green 515 peak Peak Wavelength nm IF=20mA Super Bright Yellow 590 Green 525 D 1 Dominant Wavelength F=20mA nm I Super Bright Yellow 590 Green 30 1/2 Spectral Line Half-width nm IF=20mA Super Bright Yellow 20 Green 45 C Capacitance pF VF=0V f=1MHz Super Bright Yellow 45 Green 3.3 4.1 VF 2 Forward Voltage V IF=20mA Super Bright Yellow 2 2.5 Green 50 IR Reverse Current uA VR = 5V Super Bright Yellow 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Green Super Bright Yellow Units Power dissipation 102.5 75 mW DC Forward Current 25 30 mA Peak Forward Current 1 150 140 mA Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAN7061 REV NO: V.1B DATE: JUN/17/2014 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203014334