APHBM2012CGKSEKC 2.0 x 1.25 mm SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The Super Bright Orange device is made with AlGaInP (on GaAs substrate) light emitting diode chip Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 2.0 mm x 1.25 mm SMD LED, 0.45 mm max. thickness Low power consumption Wide viewing angle Ideal for backlight and indicator Package: 2000 pcs / reel Moisture sensitivity level: 3 Halogen-free RoHS compliant APPLICATIONS RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 20 50 Green (AlGaInP) *20 *50 APHBM2012CGKSEKC Water Clear 120 150 250 Super Bright Orange (AlGaInP) *80 *180 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAG8826 / 1203006100 Rev No: V.10A Date: 07/08/2021 APHBM2012CGKSEKC ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Green 574 Wavelength at Peak Emission I = 20mA - nm F peak Super Bright Orange 610 Green 570 1 Dominant Wavelength I = 20mA - nm F dom Super Bright Orange 605 Spectral Bandwidth at 50% REL MAX Green 20 - nm I = 20mA Super Bright Orange 29 F Green 15 Capacitance C - pF Super Bright Orange 15 Green 2.1 2.5 2 Forward Voltage I = 20mA V V F F Super Bright Orange 2.1 2.5 Green 10 Reverse Current (V = 5V) I - A R R Super Bright Orange 10 Temperature Coefficient of Green 0.12 peak TC - nm/C peak I = 20mA, -10C T 85C Super Bright Orange 0.13 F Temperature Coefficient of Green 0.08 dom TC - nm/C dom I = 20mA, -10C T 85C Super Bright Orange 0.06 F Temperature Coefficient of V Green -1.9 F TC - mV/C V I = 20mA, -10C T 85C Super Bright Orange -1.9 F Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Green Super Bright Orange Power Dissipation P 75 75 mW D Reverse Voltage V 5 5 V R Junction Temperature T 115 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 30 mA F 1 Peak Forward Current I 150 195 mA FM Electrostatic Discharge Threshold (HBM) 3000 3000 V - 2 Thermal Resistance (Junction / Ambient) R 620 600 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 500 470 C/W th JS Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. R ,R Results from mounting on PC board FR4 (pad size 16 mm per pad). th JA th JS 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAG8826 / 1203006100 Rev No: V.10A Date: 07/08/2021