APHBM2012LCGKSYKC Kingbright

APHBM2012LCGKSYKC 2.0 x 1.25 mm SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The Super Bright Yellow device is made with AlGaInP (on GaAs substrate) light emitting diode chip Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 2.0 mm x 1.25 mm SMD LED, 0.45 mm max. thickness Low power consumption Wide viewing angle Ideal for backlight and indicator Package: 2000 pcs / reel Moisture sensitivity level: 3 RoHS compliant APPLICATIONS Backlight RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 2mA Viewing A ngle Emitting Color Part Number Lens Type (Material) Min. Typ. 2 1/2 1.2 3 Green (AlGaInP) APHBM2012LCGKSYKC Water Clear 120 Super Bright Yellow 6 10 (AlGaInP) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2017 Kingbright. All Rights Reserved. Spec No: DSAO4525 / 1203015149 Rev No: V.2B Date: 07/31/2017 APHBM2012LCGKSYKC ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Min. Typ. Max. Green 574 Wavelength at Peak Emission I = 2mA - - nm F peak Super Bright Yellow 590 Green 570 1 Dominant Wavelength I = 2mA - - nm F dom Super Bright Yellow 590 Spectral Bandwidth at 50% REL MAX Green 20 - - nm I = 2mA Super Bright Yellow 20 F Green 15 Capacitance C - - pF Super Bright Yellow 20 Green 1.5 1.9 2.1 2 Forward Voltage I = 2mA V V F F Super Bright Yellow 1.5 1.85 2.1 Green 10 Reverse Current (V = 5V) I - - uA R R Super Bright Yellow 10 Notes: 1. The dominant wavelength ( d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Green Super Bright Yellow Power Dissipation P 75 75 mW D Reverse Voltage V 5 5 V R Junction Temperature T 115 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 30 mA F 1 Peak Forward Current I 150 175 mA FM Electrostatic Discharge Threshold (HBM) 3000 3000 V - Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2017 Kingbright. All Rights Reserved. Spec No: DSAO4525 / 1203015149 Rev No: V.2B Date: 07/31/2017