APHBM2012LVBDSEKJ3C Kingbright

APHBM2012LVBDSEKJ3C 2.0 x 1.25 mm SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Blue source color devices are made with InGaN Light Emitting Diode The Hyper Red device is based on light emitting diode chip made from AlGaInP Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 2.0 mm x 1.25 mm SMD LED, 0.45 mm max. thickness Low power consumption Wide viewing angle Ideal for backlight and indicator Package: 2000 pcs / reel Moisture sensitivity level: 3 RoHS compliant APPLICATIONS RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 2mA Viewing A ngle Emitting Color Part Number Lens Type (Material) Min. Typ. 2 1/2 10 20 Blue (InGaN) *10 *20 APHBM2012LVBDSEKJ3C Water Clear 120 80 150 Hyper Red (AlGaInP) *30 *60 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2017 Kingbright. All Rights Reserved. Spec No: DSAO4587 / 1203015177 Rev No: V.2A Date: 07/07/2017 APHBM2012LVBDSEKJ3C ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Min. Typ. Max. Blue 465 Wavelength at Peak Emission I = 2mA - nm F peak Hyper Red 640 Blue 470 1 Dominant Wavelength I = 2mA - nm F dom Hyper Red 625 Spectral Bandwidth at 50% REL MAX Blue 22 - nm I = 2mA Hyper Red 20 F Blue 100 Capacitance C - pF Hyper Red 27 Blue 2.2 2.65 3.0 2 Forward Voltage I = 2mA V V F F Hyper Red 1.5 1.8 2.1 Blue 50 Reverse Current (V = 5V) I - - uA R R Hyper Red 10 Notes: 1. The dominant wavelength ( d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Blue Hyper Red Power Dissipation P 120 84 mW D Reverse Voltage V 5 5 V R Junction Temperature T 115 115 C J Operating Temperature T -40 To +85 C op Storage Temperature T -40 To +85 C stg DC Forward Current I 30 30 mA F 1 Peak Forward Current I 100 150 mA FM Electrostatic Discharge Threshold (HBM) 250 3000 V - Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2017 Kingbright. All Rights Reserved. Spec No: DSAO4587 / 1203015177 Rev No: V.2A Date: 07/07/2017