X-On Electronics has gained recognition as a prominent supplier of APHFT1612PBASURKVGAC Standard LEDs - SMD across the USA, India, Europe, Australia, and various other global locations. APHFT1612PBASURKVGAC Standard LEDs - SMD are a product manufactured by Kingbright. We provide cost-effective solutions for Standard LEDs - SMD, ensuring timely deliveries around the world.
We are delighted to provide the APHFT1612PBASURKVGAC from our Standard LEDs - SMD category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the APHFT1612PBASURKVGAC and other electronic components in the Standard LEDs - SMD category and beyond.
1.6X1.26mm SMD CHIP LED LAMP Part Number: APHFT1612PBASURKVGAC PRELIMINARY SPEC ATTENTION Blue OBSERVE PRECAUTIONS Hyper Red FOR HANDLING Green ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 1.6x1.26mm SMT LED, 0.52mm THICKNESS. The Blue source color devices are made with InGaN z LOW POWER CONSUMPTION. on SiC Light Emitting Diode. z IDEAL FOR BACKLIGHT AND INDICATOR. The Hyper Red source color devices are made with DH z VARIOUS COLORS AND LENS TYPES AVAILABLE. InGaAlP on GaAs substrate Light Emitting Diode. z PACKAGE : 2000PCS / REEL. The Green source color devices are made with InGaN on z MOISTURE SENSITIVITY LEVEL : LEVEL 3. G-SiC Light Emitting Diode. z RoHS COMPLIANT. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008 ) unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG5710 REV NO: V.2 DATE: MAY/18/2007 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203005323 Selection Guide Iv (mcd) 2 V iewing 20mA Angle 1 Part No. Dice Lens Type Min. Typ. 2 1/2 Blue (InGaN) 18 60 APHFT1612PBASURKVGAC Hyper Red (InGaAlP) WATER CLEAR 70 150 120 Green (InGaN) 70 180 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Blue 468 peak Peak Wavelength Hyper Red 650 nm IF=20mA Green 520 Blue 470 D 1 Dominant Wavelength Hyper Red 635 nm IF=20mA Green 525 Blue 21 1/2 Spectral Line Half-width Hyper Red 28 nm IF=20mA Green 35 Blue 100 C Capacitance Hyper Red 35 pF VF=0V f=1MHz Green 100 Blue 3.2 4 VF 2 Forward Voltage Hyper Red 1.95 2.5 V IF=20mA Green 3.2 4 Blue 10 IR Reverse Current Hyper Red 10 uA VR=5V Green 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Blue Hyper Red Green Units Power dissipation 120 75 120 mW DC Forward Current 30 30 30 mA Peak Forward Current 1 100 185 100 mA Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5710 REV NO: V.2 DATE: MAY/18/2007 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203005323