APHHS1005QWF/D Kingbright

1.0X0.5mm SMD CHIP LED LAMP Part Number: APHHS1005QWF/D White ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Descriptions z 1.0mmX0.5mm SMT LED, 0.5mm thickness. z The source color devices are made with InGaN Light z Low power consumption. Emitting Diode. z Wide viewing angle. z Electrostatic discharge and power surge could damage z Ideal for backlight and indicator. the LEDs. z Package: 2000pcs / reel . z It is recommended to use a wrist band or anti- z Moisture sensitivity level : level 3. electrostatic glove when handling the LEDs. z RoHS compliant. z All devices, equipments and machineries must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAK0125 REV NO: V.5B DATE: AUG/22/2014 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203009228 Selection Guide Iv (mcd) [2] Viewing @ 20mA Angle [1] Part No. Dice Lens Type Min. Typ. 21/2 APHHS1005QWF/D White (InGaN) Yellow Fluorescent 120 200 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2.Luminous intensity/ luminous Flux: +/-15%. 3.Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions VF [1] Forward Voltage White 3.3 4.0 V IF=20mA IR Reverse Current White 50 uA VR = 5V x [2] 0.31 Chromaticity Coordinates White y [2] 0.31 C Capacitance White 100 pF VF=0V;f=1MHz Notes: 1.Forward Voltage: +/-0.1V. 2.Measurement Tolerance Of The Chromaticity Coordinates Is 0.01. 3.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter White Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1.1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAK0125 REV NO: V.5B DATE: AUG/22/2014 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203009228