APTB1612YSGC-F01 Kingbright

1.6X1.25mm BI-COLOR SMD CHIP LED LAMP Part Number: APTB1612YSGC-F01 Yellow Super Bright Green Features Descriptions z 1.6mmx1.25mm SMD LED, 0.65mm thickness. z The Yellow source color devices are made with Gallium z Bi-color,low power consumption. Arsenide Phosphide on Gallium Phosphide Yellow Light z Wide viewing angle. Emitting Diode. z Ideal for backlight and indicator. z The Super Bright Green source color devices are made z Package : 2000pcs / reel. with Gallium Phosphide Green Light Emitting Diode. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Yellow Green Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008 ) unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAE7243 REV NO: V.11B DATE: DEC/07/2016 PAGE: 1 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203002074 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Emitting Color (Material) Lens Type Min. Typ. 21/2 Yellow (GaAsP/GaP) 3 8 APTB1612YSGC-F01 Water Clear 150 Super Bright Green (GaP) 5 12 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Emitting Color Typ. Max. Units Test Conditions Yellow 590 peak Peak Wavelength nm IF=20mA Super Bright Green 565 Yellow 588 D 1 Dominant Wavelength nm IF=20mA Super Bright Green 568 Yellow 35 1/2 Spectral Line Half-width nm IF=20mA Super Bright Green 30 Yellow 20 C Capacitance pF VF=0V f=1MHz Super Bright Green 15 Yellow 2.1 2.5 VF 2 Forward Voltage F=20mA V I Super Bright Green 2.2 2.5 Yellow 10 IR Reverse Current uA VR = 5V Super Bright Green 10 Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter Yellow Super Bright Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current 1 140 140 mA Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAE7243 REV NO: V.11B DATE: DEC/07/2016 PAGE: 2 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203002074