APTD1608QWF/D Kingbright

1.6X0.8mm SMD CHIP LED LAMP Part Number: APTD1608QWF/D White ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Descriptions z 1.6mmX0.8mm SMT LED, 0.95mm thickness. z The source color devices are made with InGaN Light z Low power consumption. Emitting Diode. z Wide viewing angle. z Electrostatic discharge and power surge could damage z Ideal for backlight and indicator. the LEDs. z Package: 2000pcs / reel . z It is recommended to use a wrist band or anti- z Moisture sensitivity level : level 3. electrostatic glove when handling the LEDs. z RoHS compliant. z All devices, equipments and machineries must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAJ7605 REV NO: V.4B DATE: AUG/26/2014 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203009946 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 APTD1608QWF/D White (InGaN) Yellow Fluorescent 120 250 170 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions VF 1 Forward Voltage White 3.3 4.0 V IF=20mA IR Reverse Current White 50 uA VR = 5V x 2 0.31 Chromaticity Coordinates White y 2 0.31 C Capacitance White 100 pF VF=0V f=1MHz Notes: 1.Forward Voltage: +/-0.1V. 2.Measurement tolerance of the chromaticity coordinates is 0.02. 3.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter White Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current 1 150 mA Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAJ7605 REV NO: V.4B DATE: AUG/26/2014 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203009946