APTD2012LZGCK Kingbright

APTD2012LZGCK 2.0 x 1.25 mm SMD Chip LED Lamp PACKAGE DIMENSIONS DESCRIPTIONS The Green source color devices are made with InGaN on Sapphire Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 2.0 mm x 1.25 mm SMD LED, 1.05 mm thickness Low power consumption Ideal for backlight and indicator Package: 3000 pcs / reel Moisture sensitivity level: 3 Halogen-free RoHS compliant APPLICATIONS Backlight Status indicator RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 2mA Viewin g Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 APTD2012LZGCK Water Clear 180 440 30 Green (InGaN) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAO7913 / 1203015437 Rev No: V.5B Date: 08/11/2021 APTD2012LZGCK ELECTRICAL / OPTICAL CHARACTERISTICS at Ta=25C Value Parameter Symbol Emitting Color Unit Min. Typ. Max. Wavelength at Peak Emission I = 2mA Green - 515 - nm F peak 1 Dominant Wavelength I = 2mA Green - 525 - nm F dom Spectral Bandwidth at 50% REL MAX Green - 35 - nm I = 2mA F Capacitance C Green - 45 - pF 2 Forward Voltage I = 2mA V Green 2.2 2.65 3.1 V F F Reverse Current (V = 5V) I Green - - 50 A R R Temperature Coefficient of peak TC Green - 0.05 - nm/C peak I = 2mA, -10C T 85C F Temperature Coefficient of dom TC Green - 0.03 - nm/C dom I = 2mA, -10C T 85C F Temperature Coefficient of V F TC Green - -2.9 - mV/C V IF = 2mA, -10C T 85C Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at Ta=25C Parameter Symbol Value Unit Power Dissipation P 82 mW D Reverse Voltage V 5 V R Junction Temperature T 115 C J Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 20 mA F 1 Peak Forward Current I 100 mA FM Electrostatic Discharge Threshold (HBM) 450 V - 2 Thermal Resistance (Junction / Ambient) R 720 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 560 C/W th JS Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. R ,R Results from mounting on PC board FR4 (pad size 16 mm per pad). th JA th JS 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAO7913 / 1203015437 Rev No: V.5B Date: 08/11/2021