APTF1616LSEKJ3ZGKQBC Kingbright

APTF1616LSEKJ3ZGKQBC 1.6 x 1.6 mm Full-Color Surface Mount LED DESCRIPTIONS PACKAGE DIMENSIONS The Hyper Red device is based on light emitting diode chip made from AlGaInP The Green source color devices are made with InGaN on Sapphire Light Emitting Diode The Blue source color devices are made with InGaN Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 1.6 mm x 1.6 mm SMD LED, 0.7 mm thickness Low power consumption Can produce any color in visible spectrum, including white light Package: 2000 pcs / reel Moisture sensitivity level: 3 RoHS compliant RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) APPLICATIONS Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Notes: Observe precautions for handling 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008 ) unless otherwise noted. electrostatic discharge sensitive devices 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 2mA Viewing A ngle Emitting Color Part Number Lens Type (Material) Min. Typ. 2 1/2 Hyper Red 20 40 (AlGaInP) Green (InGaN) 20 50 Water Clear APTF1616LSEKJ3ZGKQBC 130 6 14 Blue (InGaN) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2017 Kingbright. All Rights Reserved. Spec No: DSAO4460 / 1203015167 Rev No: V.3B Date: 07/06/2017 APTF1616LSEKJ3ZGKQBC ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Hyper Red 640 Wavelength at Peak Emission I = 2mA Green 515 - nm F peak Blue 460 Hyper Red 625 1 Dominant Wavelength I = 2mA Green 525 - nm F dom Blue 465 Hyper Red 20 Spectral Bandwidth at 50% REL MAX Green 35 - nm I = 2mA F Blue 25 Hyper Red 27 Capacitance C Green 45 - pF Blue 100 Hyper Red 1.8 2.1 2 Forward Voltage I = 2mA V Green 2.65 3.1 V F F Blue 2.65 3.1 Hyper Red 10 Reverse Current (V = 5V) I Green - 50 uA R R Blue 50 Notes: 1. The dominant wavelength ( d) above is the setup value of the sorting machine. (Tolerance d: 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Hyper Red Green Blue 1 Power Dissipation P 84 102.5 120 mW D Reverse Voltage V 5 5 5 V R Junction Temperature T 115 115 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg 1 DC Forward Current I 30 25 30 mA F 2 Peak Forward Current I 150 150 150 mA FM Electrostatic Discharge Threshold (HBM) 3000 450 250 V - Notes: 1. 1/10 Duty Cycle , 0.1ms Pulse Width . 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2017 Kingbright. All Rights Reserved. Spec No: DSAO4460 / 1203015167 Rev No: V.3B Date: 07/06/2017