APTF1616SEEZGKQBKC 1.6 x 1.6 mm Full-Color Surface Mount LED DESCRIPTIONS PACKAGE DIMENSIONS The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The Green source color devices are made with InGaN on Sapphire Light Emitting Diode The Blue source color devices are made with InGaN Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 1.6 mm x 1.6 mm SMD LED, 0.7 mm thickness Low power consumption Can produce any color in visible spectrum, including white light Package: 2000 pcs / reel Moisture sensitivity level: 3 Halogen-free RECOMMENDED SOLDERING PATTERN RoHS compliant (units : mm tolerance : 0.1) APPLICATIONS Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications Notes: ATTENTION 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008 ) unless otherwise noted. Observe precautions for handling 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. electrostatic discharge sensitive devices 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 Hyper Red 55 110 (AlGaInP) 120 280 Green (InGaN) APTF1616SEEZGKQBKC Water Clear 130 40 70 Blue (InGaN) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2020 Kingbright. All Rights Reserved. Spec No: DSAO2063 / 1203013277 Rev No: V.4B Date: 11/03/2020 APTF1616SEEZGKQBKC ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Hyper Red 630 Wavelength at Peak Emission I = 20mA Green 515 - nm F peak Blue 460 Hyper Red 621 1 Dominant Wavelength I = 20mA Green 525 - nm F dom Blue 465 Hyper Red 20 Spectral Bandwidth at 50% REL MAX Green 35 - nm I = 20mA F Blue 25 Hyper Red 25 Capacitance C Green 45 - pF Blue 100 Hyper Red 2 2.5 2 Forward Voltage I = 20mA V Green 3.3 4.1 V F F Blue 3.3 4 Hyper Red 10 Reverse Current (V = 5V) I Green - 50 A R R Blue 50 Hyper Red 0.13 Temperature Coefficient of peak TC Green 0.05 - nm/C peak I = 20mA, -10C T 85C F Blue 0.04 Hyper Red 0.06 Temperature Coefficient of dom TC Green 0.03 - nm/C dom I = 20mA, -10C T 85C F Blue 0.03 Hyper Red -2 Temperature Coefficient of V F TC Green -3 - mV/C V I = 20mA, -10C T 85C F Blue -3 Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d: 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Hyper Red Green Blue Power Dissipation P 75 102.5 120 mW D Reverse Voltage V 5 5 5 V R Junction Temperature T 115 115 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 25 30 mA F 1 Peak Forward Current I 195 150 150 mA FM Electrostatic Discharge Threshold (HBM) 3000 450 250 V - 2 Thermal Resistance (Junction / Ambient) R 780 790 790 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 640 650 650 C/W th JS Notes: 1. 1/10 Duty Cycle , 0.1ms Pulse Width . 2 2. Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size 16 mm per pad). 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2020 Kingbright. All Rights Reserved. Spec No: DSAO2063 / 1203013277 Rev No: V.4B Date: 11/03/2020