ATS2012UV365 Kingbright

ATS2012UV365 2.0 x 1.25 mm UV LED With Ceramic Substrate FEATURES PACKAGE DIMENSIONS 2.0 mm x 1.25 mm SMD LED, 0.75 mm thickness Low power consumption Wide viewing angle Package: 2000 pcs / reel Moisture sensitivity level: 1 Halogen-free RoHS compliant APPLICATIONS Photocatalytic Purification Blood and Counterfeit money detection UV curing in nail salon, dental, and poster printing applications UV Sensor Light PACKAGE MATERIALS Material as follows: Package: Ceramics Encapsulating resin: Silicone resin Electrodes: Au plating RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 e(mW) V iewing 20mA Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 ATS2012UV365 Ultraviolet (InGaN) Water Clear 8.6 13 150 Notes: 1. 1/2 is the angle from optical centerline where the radiant intensity is 1/2 of the optical peak value. 2. Radiant flux: +/-15%. 3. Radiant flux value is traceable to CIE127-2007 standards. Page 1 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAP4442 / 1212000492 Rev No: V.2B Date: 03/26/2021 ATS2012UV365 ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Parameter Symbol Value Unit Wavelength at Peak Emission I = 20mA Min. 360 F Wavelength at Peak Emission I = 20mA Typ. 365 nm F peak Wavelength at Peak Emission I = 20mA Max. 370 F Spectral Bandwidth at 50% REL MAX I = 20mA Typ. 10 nm F Forward Voltage I = 20mA Typ. 3.3 F 1 V V F Forward Voltage I = 20mA Max. 3.8 F Reverse Current (V = 5V) Max. I 50 A R R Temperature Coefficient of V F TC -3.0 mV/C V I = 20mA, -10C T 85C F Notes: 1. Forward voltage: 0.1V. 2. Wavelength value is traceable to CIE127-2007 standards. 3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Parameter Symbol Value Unit Power Dissipation P 120 mW D Reverse Voltage V 5 V R Junction Temperature T 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 mA F 1 Peak Forward Current I 100 mA FM 2 Thermal Resistance (Junction / Ambient) R 100 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 50 C/W th JS Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. R ,R Results from mounting on PC board FR4 (pad size 16 mm per pad). th JA th JS 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAP4442 / 1212000492 Rev No: V.2B Date: 03/26/2021