KCSA03-105 Kingbright

SURFACE MOUNT DISPLAY P/N: KCSA03-105 HYPER RED Features Description 0.3 INCH DIGIT HEIGHT. The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. LOW CURRENT OPERATION. EXCELLENT CHARACTER APPEARANCE. I.C. COMPATIBLE. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 550PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Package Dimensions && Internal Circuit Diagram && Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01 )unless otherwise noted. 2. Specifications are subject to change without notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DSAF9705 REV NO: V.2 DATE: MAR/17/2006 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LISelection Guide Iv (ucd) 1 10mA Part No. Dice Lens Type Description Min. Typ. Common Anode, Rt. KCSA03-105 HYPER RED (InGaAlP) WHITE DIFFUSED 3000 15257 Hand Decimal. Note: 1.Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Peak Wavelength Hyper Red 650 nm IF=20mA peak D 1 Dominant Wavelength Hyper Red 635 nm IF=20mA 1/2 Spectral Line Half-width Hyper Red 28 nm IF=20mA C Capacitance Hyper Red 35 pF VF=0V f=1MHz VF 2 Forward Voltage Hyper Red 1.95 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm 2.Forward Voltage: +/-0.1V Absolute Maximum Ratings at TA=25C Parameter Hyper Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current 1 185 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF9705 REV NO: V.2 DATE: MAR/17/2006 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI