KPBD-3224LVSURKZGKC Kingbright

3.2x2.4mm SMD CHIP LED LAMP Part Number: KPBD-3224LVSURKZGKC ATTENTION Hyper Red OBSERVE PRECAUTIONS Green FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Descriptions z 3.2x2.4mm SMD LED, 2.4mm thickness. z The Hyper Red source color devices are made with z Low power consumption. AlGaInP on GaAs substrate Light Emitting Diode. z Ideal for backlight and indicator. z The Green source color devices are made with InGaN z Package : 1500pcs / reel. on Sapphire Light Emitting Diode. z Moisture sensitivity level : level 3. z Electrostatic discharge and power surge could damage z Low current IF=2mA operating. the LEDs. z RoHS compliant. z It is recommended to use a wrist band or anti- electrostatic glove when handling the LEDs. z All devices, equipments and machineries must be electrically grounded. Package Dimensions Red Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAO8540 REV NO: V.1A DATE: JUN/10/2016 PAGE: 1 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203015159 Selection Guide Iv (mcd) 2 Viewing 2mA Angle 1 Part No. Emitting Color (Material) Lens Type Min. Typ. 21/2 20 50 Hyper Red (AlGaInP) *10 *30 KPBD-3224LVSURKZGKC Water Clear 20 120 250 Green (InGaN) *120 *250 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Emitting Color Min. Typ. Max. Units Test Conditions Hyper Red 645 peak Peak Wavelength nm IF=2mA Green 515 Hyper Red 630 D 1 Dominant Wavelength nm IF=2mA Green 525 Hyper Red 28 1/2 Spectral Line Half-width nm IF=2mA Green 35 Hyper Red 35 C Capacitance pF VF=0V f=1MHz Green 45 Hyper Red 1.5 1.75 2.1 VF 2 Forward Voltage F=2mA V I Green 2.2 2.65 3.1 Hyper Red 10 IR Reverse Current uA VR = 5V Green 50 Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Green Units Power dissipation 63 77.5 mW DC Forward Current 30 25 mA Peak Forward Current 1 185 150 mA Electrostatic Discharge Threshold (HBM) 3000 450 V Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAO8540 REV NO: V.1A DATE: JUN/10/2016 PAGE: 2 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203015159