KPDA-3020LVSYCK-J3-PF Kingbright

3.0x2.0mm RIGHT ANGLE SMD LED Part Number: KPDA-3020LVSYCK-J3-PF Super Bright Yellow Features Description z 3.0mmx2.0mm SMD LED,2.8mm thickness. The Super Bright Yellow device is based on light emitting z Low power consumption. diode chip made from AlGaInP. z Ideal for back light and indicator z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z Tinned pads for improved solderability. z Low current IF=2mA operating. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAO6602 REV NO: V.2B DATE: MAY/30/2016 PAGE: 1 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203014450 Selection Guide Iv (mcd) 2 Viewing 2mA Angle 1 Part No. Emitting Color (Material) Lens Type Min. Typ. 21/2 KPDA-3020LVSYCK-J3-PF Super Bright Yellow (AlGaInP) Water Clear 180 500 10 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Emitting Color Typ. Max. Units Test Conditions peak Peak Wavelength Super Bright Yellow 590 nm IF=2mA D 1 Dominant Wavelength Super Bright Yellow 590 nm IF=2mA 1/2 Spectral Line Half-width Super Bright Yellow 20 nm IF=2mA C Capacitance Super Bright Yellow 45 pF VF=0V f=1MHz VF 2 Forward Voltage Super Bright Yellow 1.85 2.1 V IF=2mA IR Reverse Current Super Bright Yellow 10 uA VR=5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter Values Units Power dissipation 63 mW DC Forward Current 30 mA Peak Forward Current 1 140 mA Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAO6602 REV NO: V.2B DATE: MAY/30/2016 PAGE: 2 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203014450