KPHHS-1005LVQBC-D Kingbright

1.0X0.5mm SMD CHIP LED LAMP Part Number: KPHHS-1005LVQBC-D Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Descriptions Features z The Blue source color devices are made with InGaN z 1.0mmX0.5mm SMD LED, 0.5mm thickness. Light Emitting Diode. z Low power consumption. z Electrostatic discharge and power surge could damage z Wide viewing angle. the LEDs. z Ideal for backlight and indicator. z It is recommended to use a wrist band or anti- z Package: 2000pcs / reel . electrostatic glove when handling the LEDs. z Moisture sensitivity level : level 3. z All devices, equipments and machineries must be z Low current IF=2mA operating. electrically grounded. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAO7821 REV NO: V.2B DATE: JUN/02/2016 PAGE: 1 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203015122 Selection Guide Iv (mcd) 2 Viewing 2mA Angle 1 Part No. Emitting Color (Material) Lens Type Min. Typ. 21/2 KPHHS-1005LVQBC-D Blue (InGaN) Water Clear 6 15 140 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Emitting Color Typ. Max. Units Test Conditions peak Peak Wavelength Blue 460 nm IF=2mA D 1 Dominant Wavelength Blue 465 nm IF=2mA 1/2 Spectral Line Half-width Blue 25 nm IF=2mA C Capacitance Blue 100 pF VF=0V f=1MHz VF 2 Forward Voltage Blue 2.65 3 V IF=2mA IR Reverse Current Blue 50 uA VR=5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter Values Units Power dissipation 90 mW DC Forward Current 30 mA Peak Forward Current 1 150 mA Electrostatic Discharge Threshold (HBM) 250 V Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAO7821 REV NO: V.2B DATE: JUN/02/2016 PAGE: 2 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203015122