KPT-3216LVZGCK Kingbright

3.2mmx1.6mm SMD CHIP LED LAMP Part Number: KPT-3216LVZGCK Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Descriptions z 3.2mmx1.6mm SMD LED, 0.75mm thickness. z The Green source color devices are made with InGaN z Low power consumption. on Sapphire Light Emitting Diode. z Wide viewing angle. z Electrostatic discharge and power surge could damage z Ideal for backlight and indicator. the LEDs. z Package : 2000pcs / reel. z It is recommended to use a wrist band or anti- z Moisture sensitivity level : level 3. electrostatic glove when handling the LEDs. z Low current IF=2mA operating. z All devices, equipments and machineries must be z RoHS compliant. electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAO7308 REV NO: V.2B DATE: JUN/01/2016 PAGE: 1 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203014471 Selection Guide Iv (mcd) 2 Viewing 2mA Angle 1 Part No. Emitting Color (Material) Lens Type Min. Typ. 21/2 KPT-3216LVZGCK Green (InGaN) Water Clear 20 50 150 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Emitting Color Typ. Max. Units Test Conditions peak Peak Wavelength Green 515 nm IF=2mA D 1 Dominant Wavelength Green 525 nm IF=2mA 1/2 Spectral Line Half-width Green 35 nm IF=2mA C Capacitance Green 45 pF VF=0V f=1MHz VF 2 Forward Voltage Green 2.65 3 V IF=2mA IR Reverse Current Green 50 uA VR=5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter Values Units Power dissipation 75 mW DC Forward Current 25 mA Peak Forward Current 1 150 mA Electrostatic Discharge Threshold (HBM) 450 V Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAO7308 REV NO: V.2B DATE: JUN/01/2016 PAGE: 2 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203014471