KPTD-1608LVSECK-J4-PF Kingbright

1.6X0.8mm SMD CHIP LED LAMP Part Number: KPTD-1608LVSECK-J4-PF Super Bright Orange Features Description z 1.6mmX0.8mm SMD LED, 0.95mm thickness. The Orange source color devices are made with AlGaInP z Low power consumption. Light Emitting Diode. z Wide viewing angle. z Ideal for backlight and indicator. z Package: 2000pcs / reel . z Moisture sensitivity level : level 3. z Low current IF=2mA operating. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAO7826 REV NO: V.1A DATE: APR/15/2016 PAGE: 1 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203014440 Selection Guide Iv (mcd) 2 Viewing 2mA Angle 1 Part No. Emitting Color (Material) Lens Type Min. Typ. 21/2 250 450 KPTD-1608LVSECK-J4-PF Super Bright Orange (AlGaInP) Water Clear 60 *80 *150 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Emitting Color Typ. Max. Units Test Conditions peak Peak Wavelength Super Bright Orange 611 nm IF=2mA D 1 Dominant Wavelength Super Bright Orange 605 nm IF=2mA 1/2 Spectral Line Half-width Super Bright Orange 17 nm IF=2mA C Capacitance Super Bright Orange 27 pF VF=0V f=1MHz VF 2 Forward Voltage Super Bright Orange 1.8 2.1 V IF=2mA IR Reverse Current Super Bright Orange 10 uA VR=5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter Values Units Power dissipation 63 mW DC Forward Current 30 mA Peak Forward Current 1 150 mA Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAO7826 REV NO: V.1A DATE: APR/15/2016 PAGE: 2 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203014440