L-115WSURKCGKC Kingbright

T-1 (3mm) BI-COLOR INDICATOR LAMP Part Number: L-115WSURKCGKC Hyper Red Green Features Description z Uniform light output. The Hyper Red source color devices are made with Al- z Low power consumption. GaInP on GaAs substrate Light Emitting Diode. z 3 leads with one common lead. The Green source color devices are made with AlGaInP on z Long life - solid state reliability. GaAs substrate Light Emitting Diode. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAG4243 REV NO: V.2 DATE: OCT/07/2010 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou ERP: 1101016733 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 Hyper Red (AlGaInP) 700 1500 L-115WSURKCGKC Water Clear 30 Green (AlGaInP) 120 250 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Hyper Red 650 peak Peak Wavelength nm IF=20mA Green 574 Hyper Red 630 D 1 Dominant Wavelength nm IF=20mA Green 570 Hyper Red 28 1/2 Spectral Line Half-width nm IF=20mA Green 20 Hyper Red 35 C Capacitance pF VF=0V f=1MHz Green 15 Hyper Red 1.95 2.5 VF 2 Forward Voltage F=20mA V I Green 2.1 2.5 Hyper Red 10 IR Reverse Current uA VR = 5V Green 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Green Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current 1 185 150 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAG4243 REV NO: V.2 DATE: OCT/07/2010 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou ERP: 1101016733