X-On Electronics has gained recognition as a prominent supplier of L-154A4SURKQBDZGW Standard LEDs - Through Hole across the USA, India, Europe, Australia, and various other global locations. L-154A4SURKQBDZGW Standard LEDs - Through Hole are a product manufactured by Kingbright. We provide cost-effective solutions for Standard LEDs - Through Hole, ensuring timely deliveries around the world.
We are delighted to provide the L-154A4SURKQBDZGW from our Standard LEDs - Through Hole category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the L-154A4SURKQBDZGW and other electronic components in the Standard LEDs - Through Hole category and beyond.
T-1 3/4 (5mm) FULL COLOR LED LAMP Part Number: L-154A4SURKQBDZGW ATTENTION Hyper Red OBSERVE PRECAUTIONS Blue FOR HANDLING Green ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z Uniform light output. The Hyper Red source color devices are made with Al- z Low power consumption. GaInP on GaAs substrate Light Emitting Diode. z Long life-solid state reliability. The Blue source color devices are made with InGaN Light z RoHS compliant. Emitting Diode. The Green source color devices are made with InGaN on Sapphire Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF8941 REV NO: V.9A DATE: OCT/12/2012 PAGE: 1 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101016260 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 300 700 Hyper Red (AlGaInP) *100 *200 120 300 L-154A4SURKQBDZGW White Blue (InGaN) Diffused 60 *120 *300 600 1300 Green (InGaN) *600 *1300 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Hyper Red 650 *645 peak Peak Wavelength Blue 468 *460 nm IF=20mA Green 515 *515 Hyper Red 630 *630 D 1 Dominant Wavelength Blue 470 *465 nm IF=20mA Green 525 *525 Hyper Red 28 1/2 Spectral Line Half-width Blue 25 nm IF=20mA Green 30 Hyper Red 35 C Capacitance Blue 100 pF VF=0V f=1MHz Green 45 Hyper Red 1.95 2.5 VF 2 Forward Voltage Blue 3.3 4 V IF=20mA Green 3.3 4.1 Hyper Red 10 IR Reverse Current Blue 50 uA VR=5V Green 50 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. * Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Blue Green Units Power dissipation 75 120 102.5 mW DC Forward Current 30 30 25 mA Peak Forward Current 1 185 150 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF8941 REV NO: V.9A DATE: OCT/12/2012 PAGE: 2 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101016260