L-3VGYW Kingbright

T-1(3mm) BI-COLOR INDICATOR LAMP Part Number: L-3VGYW Green Yellow Features Descriptions z Uniform light output. z The Green source color devices are made with Gallium z Low power consumption. Phosphide Green Light Emitting Diode. z 3 leads with one common lead. z The Yellow source color devices are made with Gallium z Long life - solid state reliability. Arsenide Phosphide on Gallium Phosphide Yellow Light z RoHS compliant. Emitting Diode. Package Dimensions G GREEN Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAB5702 REV NO: V.13B DATE: AUG/15/2014 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1101003938 KingbrightSelection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 Green (GaP) 15 40 L-3VGYW White Diffused 60 Yellow (GaAsP/GaP) 10 15 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Green 565 peak Peak Wavelength nm IF=20mA Yellow 590 Green 568 D 1 Dominant Wavelength nm IF=20mA Yellow 588 Green 30 1/2 Spectral Line Half-width nm IF=20mA Yellow 35 Green 15 C Capacitance pF VF=0V f=1MHz Yellow 20 Green 2.2 2.5 VF 2 Forward Voltage F=20mA V I Yellow 2.1 2.5 Green 10 IR Reverse Current uA VR = 5V Yellow 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Green Yellow Units Power dissipation 62.5 75 mW DC Forward Current 25 30 mA Peak Forward Current 1 140 140 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAB5702 REV NO: V.13B DATE: AUG/15/2014 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1101003938 Kingbright