L-59EYW Kingbright

T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP Part Number: WP59EYW High Efficiency Red Yellow Features Descriptions z Uniform light output. z The High Efficiency Red source color devices are made z Low power consumption. with Gallium Arsenide Phosphide on Gallium Phosphide z 3 leads with one common lead. Orange Light Emitting Diode. z Long life-solid state reliability. z The Yellow source color devices are made with Gallium z RoHS compliant. Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF2651 REV NO: V.6A DATE: APR/07/2015 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1101005784 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 30 60 High Efficiency Red (GaAsP/GaP) *20 *40 WP59EYW White Diffused 60 20 40 Yellow (GaAsP/GaP) *20 *40 Notes: 1. 1 / 2 is the angle from optical centerline where the luminous intensity is 1 / 2 of the optical peak value. 2. Luminous intensity / luminous Flux: + / -15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions High Efficiency Red 627 peak Peak Wavelength nm IF=20mA Yellow 590 High Efficiency Red 617 D 1 Dominant Wavelength nm IF=20mA Yellow 588 High Efficiency Red 45 1/2 Spectral Line Half-width nm IF=20mA Yellow 35 High Efficiency Red 15 C Capacitance pF VF=0V f=1MHz Yellow 20 High Efficiency Red 2 2.5 VF 2 Forward Voltage F=20mA V I Yellow 2.1 2.5 High Efficiency Red 10 IR Reverse Current uA VR = 5V Yellow 10 Notes: 1. Wavelength: + / -1nm. 2. Forward Voltage: + / -0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Yellow Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current 1 160 140 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2651 REV NO: V.6A DATE: APR/07/2015 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1101005784