L-7104MD/1LG1LYD Kingbright

T-1 (3mm) BI-LEVEL LED INDICATOR Part Number: L-7104MD/1LG1LYD Green Yellow Features Descriptions z Pre-trimmed leads for pc mounting. z The Green source color devices are made with Gallium z Black case enhances contrast ratio. Phosphide Green Light Emitting Diode. z Wide viewing angle. z The Yellow source color devices are made with Gallium z High reliability life measured in years. Arsenide Phosphide on Gallium Phosphide Yellow Light z Housing UL rating:94V-0. Emitting Diode. z Housing material: type 66 nylon. z Low current IF=2mA operating. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAH4244 REV NO: V.3B DATE: MAR/04/2015 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1102013362 Selection Guide Iv (mcd) 2 Viewing 2mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 Green (GaP) Green Diffused 1 2 40 L-7104MD/1LG1LYD Yellow (GaAsP/GaP) Yellow Diffused 0.7 1.5 40 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Green 565 peak Peak Wavelength nm IF=2mA Yellow 590 Green 568 D 1 Dominant Wavelength nm IF=2mA Yellow 588 Green 30 1/2 Spectral Line Half-width nm IF=2mA Yellow 35 Green 15 C Capacitance pF VF=0V f=1MHz Yellow 20 Green 1.9 2.5 VF 2 Forward Voltage F=2mA V I Yellow 1.85 2.5 Green 10 IR Reverse Current uA VR = 5V Yellow 10 Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. 4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter Green Yellow Units Power dissipation 62.5 75 mW DC Forward Current 25 30 mA Peak Forward Current 1 140 140 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAH4244 REV NO: V.3B DATE: MAR/04/2015 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1102013362