L-7104MD/1SURK1CGKD Kingbright

T-1 (3mm) BI-LEVEL LED INDICATOR Part Number: L-7104MD/1SURK1CGKD Hyper Red Green Features Descriptions z Pre-trimmed leads for pc mounting. z The Hyper Red source color devices are made with z Black case enhances contrast ratio. AlGaInP on GaAs substrate Light Emitting Diode. z Wide viewing angle. z The Green source color devices are made with AlGaInP z High reliability life measured in years. on GaAs substrate Light Emitting Diode. z Housing UL rating:94V-0. z Housing material: type 66 nylon. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAK4001 REV NO: V.2A DATE: MAY/06/2014 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1102014189 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 400 900 Hyper Red (AlGaInP) Red Diffused 40 *120 *240 L-7104MD/1SURK1CGKD 80 250 Green (AlGaInP) Green Diffused 40 *80 *250 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Hyper Red 645 peak Peak Wavelength nm IF=20mA Green 574 Hyper Red 630 D 1 Dominant Wavelength nm IF=20mA Green 570 Hyper Red 28 1/2 Spectral Line Half-width nm IF=20mA Green 20 Hyper Red 35 C Capacitance pF VF=0V f=1MHz Green 15 Hyper Red 1.95 2.5 VF 2 Forward Voltage V IF=20mA Green 2.1 2.5 Hyper Red 10 IR Reverse Current uA VR = 5V Green 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Green Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current 1 185 150 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAK4001 REV NO: V.2A DATE: MAY/06/2014 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1102014189