L-710A8EB/1I1GD Kingbright

T-1 (3mm) BI-LEVEL LED INDICATOR P/N: L-710A8EB/1I1GD HIGH EFFICIENCY RED GREEN Features Description PRE-TRIMMED LEADS FOR PC MOUNTING. The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium I.C. COMPATIBLE. Phosphide Orange Light Emitting Diode. BLACK CASE ENHANCES CONTRAST RATIO. HIGH RELIABILITY LIFE MEASURED IN YEARS. The Green source color devices are made with Gallium WIDE VIEWING ANGLE. Phosphide Green Light Emitting Diode. UL RATING : 94V-0. HOUSING MATERIAL: TYPE 66 NYLON. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF4353 REV NO: V.3 DATE: APR/10/2006 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LISelection Guide Iv (mcd) 2 V i e w i n g 10mA Angle 1 Part No. Dice Lens Type 2 1/2 Min. Typ. HIGH EFFICIENCY RED (GaAsP/GaP) RED DIFFUSED 12 25 40 L-710A8EB/1I1GD GREEN (GaP) GREEN DIFFUSED 8 20 40 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions High Efficiency Red 627 peak Peak Wavelength nm IF=20mA Green 5 6 5 High Efficiency Red 625 Dominant Wavelength nm IF=20mA D 1 Green 5 6 8 High Efficiency Red 45 1/2 Spectral Line Half-width nm IF=20mA Green 3 0 High Efficiency Red 15 C Capacitance pF VF=0V f=1MHz Green 1 5 High Efficiency Red 2.0 2.5 V 2 Forward Voltage V IF=20mA F Green 2 . 2 2 . 5 High Efficiency Red 10 IR Reverse Current uA VR = 5V Green 1 0 Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Green Units Power dissipation 105 105 mW DC Forward Current 30 25 mA Peak Forward Current 1 160 140 mA Reverse Voltage 5 V Operating/storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF4353 REV NO: V.3 DATE: APR/10/2006 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI