L-710A8EB/1Y1GT Kingbright

T-1 (3mm) BI-LEVEL LED INDICATOR Part Number: L-710A8EB/1Y1GT Yellow Green Features Descriptions z Pre-trimmed leads for pc mounting. z The Yellow source color devices are made with Gallium z Black case enhances contrast ratio. Arsenide Phosphide on Gallium Phosphide Yellow Light z High reliability life measured in years. Emitting Diode. z Housing UL rating:94V-0. z The Green source color devices are made with Gallium z Housing material: type 66 nylon. Phosphide Green Light Emitting Diode. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF5418 REV NO: V.3B DATE: MAR/04/2015 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1102009216 Selection Guide Iv (mcd) 2 Viewing 10mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 Yellow (GaAsP/GaP) Yellow Transparent 10 25 30 L-710A8EB/1Y1GT Green (GaP) Green Transparent 20 60 30 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Yellow 590 peak Peak Wavelength nm IF=20mA Green 565 Yellow 588 D 1 Dominant Wavelength nm IF=20mA Green 568 Yellow 35 1/2 Spectral Line Half-width nm IF=20mA Green 30 Yellow 20 C Capacitance pF VF=0V f=1MHz Green 15 Yellow 2.1 2.5 VF 2 Forward Voltage F=20mA V I Green 2.2 2.5 Yellow 10 IR Reverse Current uA VR = 5V Green 10 Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. 4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter Yellow Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current 1 140 140 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF5418 REV NO: V.3B DATE: MAR/04/2015 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1102009216