L-819SRSGC-CC Kingbright

10mm ROUND LED LAMP L-819SRSGC-CC SUPER BRIGHT RED SUPER BRIGHT GREEN Features Description UNIFORM LIGHT OUTPUT. The Super Bright Red source color devices are made with LOW POWER CONSUMPTION. Gallium Aluminum Arsenide Red Light Emitting Diode. 3 LEADS WITH ONE COMMON CATHODE LEAD. The Super Bright Green source color devices are made I.C. COMPATIBLE. with Gallium Phosphide Green Light Emitting Diode. LONG LIFE - SOLID STATE RELIABILITY. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAC3324 REV NO: V.3 DATE: MAR/16/2005 PAGE: 1 OF 3 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENGSelection Guide Iv (mcd) V i e w i n g 20mA Angle Part No. Dice Lens Type Min. Typ. 2 1/2 SUPER BRIGHT RED (GaAlAs) 280 600 L-819SRSGC-CC WATER CLEAR 40 SUPER BRIGHT GREEN (GaP) 70 150 Note: 1.1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Super Bright Red 660 peak Peak Wavelength nm IF=20mA Super Bright Green 565 Super Bright Red 640 D Dominant Wavelength nm IF=20mA Super Bright Green 568 Super Bright Red 20 Spectral Line Half-width nm IF=20mA 1/2 Super Bright Green 30 Super Bright Red 45 C Capacitance pF VF=0V f=1MHz Super Bright Green 15 Super Bright Red 1.85 2.5 VF Forward Voltage V IF=20mA Super Bright Green 2.2 2.5 IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Super Bright Red Super Bright Green Units Power dissipation 100 105 mW DC Forward Current 30 25 mA Peak Forward Current 1 155 140 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAC3324 REV NO: V.3 DATE: MAR/16/2005 PAGE: 2 OF 3 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG