L-934EB/1Y1ID-RV Kingbright

T-1 (3mm) BI-LEVEL LED INDICATOR Part Number: L-934EB/1Y1ID-RV Yellow High Efficiency Red Features Description z Pre-trimmed leads for pc mounting. The Yellow source color devices are made with Gallium z Black case enhances contrast ratio. Arsenide Phosphide on Gallium Phosphide Yellow Light z High reliability life measured in years. Emitting Diode. z Housing UL rating:94V-0. The High Efficiency Red source color devices are made with z Housing material: type 66 nylon. Gallium Arsenide Phosphide on Gallium Phosphide Orange z RoHS compliant. Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAE2852 REV NO: V.2A DATE: NOV/29/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1102013952 Selection Guide Iv (mcd) 2 Viewing 10mA Angle 1 Part No. Dice Lens Type Min. Typ. 2 1/2 8 15 Yellow (GaAsP/GaP) Yellow Diffused 40 *8 *15 L-934EB/1Y1ID-RV 12 30 High Efficiency Red (GaAsP/GaP) Red Diffused 40 *10 *20 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Yellow 590 peak Peak Wavelength nm IF=20mA High Efficiency Red 627 Yellow 588 D 1 Dominant Wavelength nm IF=20mA High Efficiency Red 617 Yellow 35 1/2 Spectral Line Half-width nm IF=20mA High Efficiency Red 45 Yellow 20 C Capacitance pF VF=0V f=1MHz High Efficiency Red 15 Yellow 2.1 2.5 VF 2 Forward Voltage V IF=20mA High Efficiency Red 2 2.5 Yellow 10 IR Reverse Current uA VR = 5V High Efficiency Red 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Yellow High Efficiency Red Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current 1 140 160 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAE2852 REV NO: V.2A DATE: NOV/29/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1102013952