PDC54-11CGKWA Kingbright

13.8mm (0.543INCH) 14 SEGMENT DUAL DIGIT ALPHANUMERIC DISPLAY Part Number: PDC54-11CGKWA Green Features Description z 0.54 inch character height. The Green source color devices are made with AlGaInP on z Low current operation. GaAs substrate Light Emitting Diode. z High contrast and light output. z Easy mounting on P.C. boards or sockets. z Categorized for luminous intensity. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01 )unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAK2878 REV NO: V.6A DATE: APR/05/2016 PAGE: 1 OF 6 APPROVED: Wynec CHECKED: Joe Lee DRAWN: L.T.Zhang ERP: 1312000108 KingbrightSelection Guide Iv (ucd) 1 10mA Part No. Emitting Color (Material) Lens Type Description Min. Typ. 9000 22000 Common Cathode ,Rt. PDC54-11CGKWA Green (AlGaInP) White Diffused Hand Decimal. *3600 *8000 Notes: 1. Luminous intensity / luminous Flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Emitting Color Typ. Max. Units Test Conditions peak Peak Wavelength Green 574 nm IF=10mA D 1 Dominant Wavelength Green 570 nm IF=10mA 1/2 Spectral Line Half-width Green 20 nm IF=10mA C Capacitance Green 15 pF VF=0V f=1MHz VF 2 Forward Voltage Green 2 2.5 V IF=10mA IR Reverse Current Green 10 uA VR=5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter Values Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current 1 150 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAK2878 REV NO: V.6A DATE: APR/05/2016 PAGE: 2 OF 6 APPROVED: Wynec CHECKED: Joe Lee DRAWN: L.T.Zhang ERP: 1312000108 Kingbright