56.8mm (2.3 INCH) 16 SEGMENT SINGLE DIGIT ALPHANUMERIC DISPLAY Part Number: PSA23-11GWA Green Features Description z 2.3 inch character height. The Green source color devices are made with Gallium z Low current operation. Phosphide Green Light Emitting Diode. z High contrast and light output. z Easy mounting on P.C. boards or sockets. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01 )unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAN0640 REV NO: V.1A DATE: JUN/21/2013 PAGE: 1 OF 8 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1311000080 Selection Guide Iv (ucd) 1 10mA Part No. Dice Lens Type Description Min. Typ. 5600 14000 Common Anode, Rt. PSA23-11GWA GREEN (GaP) White Diffused Hand Decimal. *1400 *3700 Note: 1. Luminous Intensity/ Luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Peak Wavelength Green 565 nm IF=20mA peak D 1 Dominant Wavelength Green 568 nm IF=20mA 1/2 Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V f=1MHz A1,A2,D1,D2,P,K 4.4 5.0 IF=20mA B,C,E,F,G,H,J,L,M,N VF 2 Forward Voltage Green V DP 2.2 2.5 A1,A2,D1,D2,P,K 10 VR = 5V Reverse Current IR B,C,E,F,G,H,J,L,M,N Green 20 uA VR = 5V (Per chip) 10 VR = 5V DP Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Green Units A1,A2,D1,D2,P,K 125 Power dissipation B,C,E,F,G,H,J,L,M,N 250 mW 62.5 DP A1,A2,D1,D2,P,K 25 DC Forward Current B,C,E,F,G,H,J,L,M,N 50 mA 25 DP A1,A2,D1,D2,P,K 140 Peak Forward Current 1 B,C,E,F,G,H,J,L,M,N 280 mA 140 DP A1,A2,D1,D2,P,K 5 Reverse Voltage 5 V B,C,E,F,G,H,J,L,M,N (Per chip) 5 DP Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAN0640 REV NO: V.1A DATE: JUN/21/2013 PAGE: 2 OF 8 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1311000080