TC23-11YWA Kingbright

58.34mm (2.3 INCH) 8x8 DOT MATRIX DISPLAY Part Number: TC23-11YWA Yellow Features Description z 2.3 inch matrix height. The Yellow source color devices are made with Gallium z Dot size 5mm. Arsenide Phosphide on Gallium Phosphide Yellow Light z Low current operation. Emitting Diode. z High contrast and light output. z Stackable horizontally. z Column cathode and column anode available. z Easy mounting on P.C. boards or sockets. z Multicolor available. z Mechanically rugged. z Standard : gray face, white dot. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01 )unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAD2464 REV NO: V.9A DATE: OCT/26/2012 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1332000634 Selection Guide Iv (ucd) 1 10mA Part No. Dice Lens Type Description Min. Typ. 5600 12000 TC23-11YWA Yellow (GaAsP/GaP) White Diffused Column Cathode *2200 *4200 Notes: 1. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength Yellow 590 nm IF=20mA D 1 Dominant Wavelength Yellow 588 nm IF=20mA 1/2 Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V f=1MHz VF 2 Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current 1 140 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAD2464 REV NO: V.9A DATE: OCT/26/2012 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1332000634