W115WSURKMGKW Kingbright

T-1 (3mm) BI-COLOR INDICATOR LAMP Part Number: W115WSURKMGKW Hyper Red Mega Green Features Descriptions z Uniform light output. z The Hyper Red source color devices are made with z Low power consumption. AlGaInP on GaAs substrate Light Emitting Diode. z 3 leads with one common lead. z The Mega Green source color devices are made with z Long life - solid state reliability. AlGaInP on GaAs substrate Light Emitting Diode. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAE4650 REV NO: V.3A DATE: JUN/18/2016 PAGE: 1 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1101013153 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Emitting Color (Material) Lens Type Min. Typ. 21/2 400 800 Hyper Red (AlGaInP) *200 *400 W115WSURKMGKW White Diffused 60 80 200 Mega Green (AlGaInP) *80 *200 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Emitting Color Typ. Max. Units Test Conditions Hyper Red 645 peak Peak Wavelength nm IF=20mA Mega Green 574 Hyper Red 630 D 1 Dominant Wavelength nm IF=20mA Mega Green 570 Hyper Red 28 1/2 Spectral Line Half-width nm IF=20mA Mega Green 20 Hyper Red 35 C Capacitance pF VF=0V f=1MHz Mega Green 15 Hyper Red 1.95 2.5 VF 2 Forward Voltage V IF=20mA Mega Green 2.1 2.5 Hyper Red 10 IR Reverse Current uA VR = 5V Mega Green 10 Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Mega Green Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current 1 185 150 mA Electrostatic Discharge Threshold (HBM) 3000 3000 V Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. 4. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAE4650 REV NO: V.3A DATE: JUN/18/2016 PAGE: 2 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1101013153