WP132XSEC/J4-AMT T-1 (3mm) Solid State Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Orange source color devices are made with AlGaInP Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES Low power consumption Popular T-1 diameter package General purpose leads Reliable and rugged Long life - solid state reliability Available on tape and reel RoHS compliant APPLICATIONS Traffic signaling Backlighting (illuminated advertising , general RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) lighting) Interior and exterior automotive lighting Substitution of micro incandescent lamps Reading lamps Signal and symbol luminaire for orientation Marker lights (e.g. Steps, exit ways, etc) Decorative and entertainment lighting Indoor and outdoor commercial and residential architectural lighting Notes: 1. All dimensions are in millimeters (inches). ATTENTION 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. Observe precautions for handling 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. electrostatic discharge sensitive devices Page 1 / 6 2017 Kingbright. All Rights Reserved. Spec No: DSAL4367 / 1101030016 Rev No: V.3A Date: 09/29/2017 WP132XSEC/J4-AMT SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing A ngle Emitting Color Part Number Lens Type (Material) Code. Min. Max. 2 1/2 Z 2700 3100 ZA 3100 3600 ZB 3600 4200 ZC 4200 5000 ZD 5000 6000 Super Bright Orange WP132XSEC/J4-AMT Water Clear 50 (AlGaInP) *Y *2300 *2700 *Z *2700 *3100 *ZA *3100 *3600 *ZB *3600 *4200 *ZC *4200 *5000 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Min. Typ. Max. Wavelength at Peak Emission I = 20mA Super Bright Orange - 611 - nm F peak 1 Dominant Wavelength I = 20mA Super Bright Orange 598 - 612 nm F dom Spectral Bandwidth at 50% REL MAX Super Bright Orange - 17 - nm I = 20mA F Capacitance C Super Bright Orange - 27 - pF 2 Forward Voltage I = 20mA V Super Bright Orange - 2.2 2.8 V F F Reverse Current (V = 5V) I Super Bright Orange - - 10 uA R R Temperature Coefficient of peak TC Super Bright Orange - 0.14 - nm/C peak I = 20mA, -10C T 85C F Temperature Coefficient of dom TC Super Bright Orange - 0.04 - nm/C dom I = 20mA, -10C T 85C F Temperature Coefficient of V F TC Super Bright Orange - -2.0 - mV/C V I = 20mA, -10C T 85C F Notes: 1. The dominant wavelength ( d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Page 2 / 6 2017 Kingbright. All Rights Reserved. Spec No: DSAL4367 / 1101030016 Rev No: V.3A Date: 09/29/2017