WP138A8QMP/GD/TG Kingbright

3.4mm RIGHT ANGLE LED INDICATOR Part Number: WP138A8QMP/GD/TG Green Features Description z Surface mount type. The Green source color devices are made with Gallium z Black case enhances contrast ratio. Phosphide Green Light Emitting Diode. z Wide viewing angle. z High reliability life measured in years. z Package:1000pcs / reel. z Moisture sensitivity level : level 3. z Housing UL rating:94V-0. z Housing material: PPA. z High temperature resistant housing. z High glass transition temperature epoxy. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF4747 REV NO: V.10B DATE: AUG/18/2016 PAGE: 1 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1102000491 Selection Guide Iv (mcd) 2 Viewing 10mA Angle 1 Part No. Emitting Color (Material) Lens Type Min. Typ. 2 1/2 WP138A8QMP/GD/TG Green (GaP) Green Diffused 6 12 40 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Emitting Color Typ. Max. Units Test Conditions peak Peak Wavelength Green 565 nm IF=10mA D 1 Dominant Wavelength Green 568 nm IF=10mA 1/2 Spectral Line Half-width Green 30 nm IF=10mA C Capacitance Green 15 pF VF=0V f=1MHz VF 2 Forward Voltage Green 2.0 2.5 V IF=10mA IR Reverse Current Green 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter Values Units Power dissipation 62.5 mW DC Forward Current 25 mA Peak Forward Current 1 140 mA Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAF4747 REV NO: V.10B DATE: AUG/18/2016 PAGE: 2 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1102000491